Precision current loop tester, panel mount 1,6-26mA range
4-20mA current loop simulator designed for simulation of 4-20mA signals on analog inputs for PLC and DCS systems. The A2007E-SP is equipped with a precision multi-turn potentiometer for accurate and precise current adjustment. With this potentiometer the input signal is simulated in order to test software for PLC and DCS systems. For testing fault signals as a result of over or undercurrent the A2007E-SP is capable of controlling the current from 1,6-26 mA the A2007E-SP simulator is suitable for 2-wire and 4-wire 4-20mA systems.
- Multi turn potentiometer for accurate and stable current regulation.
- Simple connection with screw terminals.
- Loop-powered suitable for 2-wire and 4-wire current loop.
- Over-current protection.
- Protection for wrong connections.
- Stable current setting by internal current regulation, no temperature influence.
- Extended current range 1,6 - 26 mA.
De A2007E-SP is a current source controlled by a precision multi-turn potentiometer and can be used for 2-wire and 4-wire 4-20mA systems. More information can be found on the technical information section
The A2007 series of current loop simulators is designed an tested according European and international standards. The CE declaration of conformity can be downloaded from this page. More information about the applicable standards can be found on our technical information page about international standards
Artikelnr | A2007E-SP |
---|---|
Indicator | n.a. |
Material axle | Metal |
Current (min) | 1,6mA |
Current (max) | 26mA |
Supply (min) | 7V |
Supply (max) | 32,7V |
Connection | Screw terminal |
Icon | Label | Description | Type | Size | Download |
---|---|---|---|---|---|
ROHS_2011.pdf | ROHS Compliance Statement 2011/65/EU | 127 KB | Download | ||
FCC_A2007_02.pdf | FCC Declaration of Conformity | 72.2 KB | Download | ||
DOC_A2007E_03.pdf | CE Declaration of Conformity A2007E | 83.7 KB | Download | ||
A2007series_R10.pdf | Datasheet A2007 series R10.pdf | 357.5 KB | Download |