Skip to Main Content »

Search Site

You're currently on:

A2007B-DIN mA-gever

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • A2007B-DIN current loop tester DIN43650
  • DIN43560 plug
  • DIN 43650 connector
  • Toepassing A2007B-DIN
  • A2007B-DIN current loop tester with indicator

Current loop tester with indicator DIN 43650
 – A2007B-DIN

€192.70 Excl. VAT
Add Items to Cart
4-20mA current loop tester with DIN 43650 connection, designed for simulating pressure, position, temperature and other transmitters with a DIN 43650 connection. The plug can easily be disconnected from the transmitter and connected to the A2007B-DIN. Then it is possible to control the 4-20mA signal with the multi-turn potentiometer. The indicator gives a direct indication if the loop is powered and works correct. Because the potentiometer allows setting the 4-20mA signal alarm set-points can fast and easy be tested

Product Description
  • Multi turn potentiometer for accurate and stable current regulation.
  • Simple connection with screw terminals.
  • Loop-powered suitable for 2-wire and 4-wire current loop.
  • Over-current protection.
  • Protection for wrong connections.
  • Stable current setting by internal current regulation, no temperature influence.
  • Standard current range.

Pressure, position, temperature and other transmitters with a DIN 43650 plug connection are usually 2-wire transmitters, this means the power supply for the transmitter is delivered by the 4-20mA current loop. The A2007B-DIN is a 2-wire transmitter, which can be manually adjusted by a multi-turn potentiometer.

Therefore, the A2007B-DIN can be used as a direct replacement for pressure, temperature, position and other transmitters with a DIN 43650 plug. With the multi-turn potentiometer the current can be adjusted allowing very easy loop testing, alarm set points controllers and displays can be tested very fast and easy, making it an ideal tool for commissioning and servicing of industrial automation equipment.

The indicator reacts direct on the current, and is independent of the internal current regulation, this allows fault-finding of power supply problems, connection faults or loose contacts. Also a to high load on the current loop can be easily recognised with the indicator.

De A2007B-DIN is one of our most successful products and is used in several industry's such as maritime, refrigeration and sewage plants.

The A2007 series of current loop simulators is designed an tested according European and international standards. The CE declaration of conformity can be downloaded from this page. More information about the applicable standards can be found on our technical information page about international standards

Product Attachments
View FileDatasheet A2007-series    Size: (353.16 KB) EN - revisie 07, 25 september 2018
View FileCE DOC A2007B    Size: (81.88 KB) CE Declaration of conformity A2007B
View FileFCC_A2007    Size: (72.16 KB) FCC Declaration of conformity A2007
Additional Information
Indicator Analog
Material axle Plastic
Current (min) 4mA
Current (max) 20mA
Supply (min) 8V
Supply (max) 32,7V
Connection DIN43650
Administrative Information
EAN : 8719324187015
Manufacturer : Divize
Country of origin : Netherlands
HS tariff code : 8543 20 00 00
Weight : 210 g

You may also be interested in the following product(s)

4 20mA current loop tester with indicator and 4mm connection

4 20mA current loop tester with indicator and 4mm connection

€192.70 Excl. VAT